Lucas III-114 LED Street Light- U-Tron（Beijing）Electronics Co., Ltd_

Home > Products > Lighting Fixture > Architectural Lighting >Street Lights

Lucas III-114 LED Street Light

MOQ ： piece

Lead Time ： Days

Inquiry Start Order

Seller Support : Trade Authenticity Guaranteed & Accepting

Payment : L/C,T/T

Departure Port : Tianjin

Product details

Supply Ability

Warranty(Year)：1 Year

Packaging & Delivery

Length：68.6 cmWidth：33.3 cm
Height：10.05 cm
Packaging：1 piece

Product Specifications

Product Description

Lucas III-114 Street Light

A-6800-114-CR2

We should say thanks to Nick Holonyac of General Electric who
invented the first red LED. Today we can use this technology to
revolutionise the future of lighting. However, we have partnered with
Cree who makes the best high power white color LEDs that can be found in
the market today. After experimenting with various different LED made
by many manufactures we have chosen Cree X Lamps LED as our main light
source. With our design Cree is able to give the best lumens per watts
ratio and the best heat disbursement.

L III 114 LED Technical Specifications

LED Type	Cree Q5
Number of LED	114
Total Power Consumption	135 watts
Power Rating:	220V 50Hz
Temperature rating:	-40 oC to 45 oC
LED Initial Flux:	12,996 lm
IP Rating:	IP 65
Lights Dimension	(L)686 x(H)198x(W)333mm
Warranty on Workmanship	36 Months
Guarantee on LED < 50% loss(Which ever comes first)	60 Months or 50,000 Hrs

L III 114 Packaging Information

Net Weight:	15.0 Kg
Gross Weight	17.5 Kg
Carton Size (1 Pc/carton):	760x400x200mm

Container	Number of Pieces
20 foot	410
40 foot	850
40 foot HQ	1,030

Engineering Drawing

Lamp Post Installation

A total of six M10 bolts is provided with each lamp. One, the top
first bolt, is used for safety purposes. Lucas Lamps are designed to fit
lamp post standards used around the world in most countries. However,
there are variations and our lamps may not fit the lamp posts used in
certain countries. Please contact us to enquire about making special
modification if required. In general we support End of Post diameters
from 65 mm to 72 mm. (2 inch to 2 ? inches).

Use the supplied M10 hex tool to secure 5 bolts to the pole tightly.
The 6th bolt, the top bolt, must go through the pole for safety reasons.

Safety Nut Installation

On the top side of the Lamp Post about 135mm from the end of pole we
recommend you drill a 10mm diameter hole. This is to secure the lamp
from falling off or sliding and twisting due to wind or other natural
causes.

Lamp Post (Light Pole) Recomendations

Lucas Lights are designed for low height lamp posts. To obtain the
best results we recommend the upper part of the lamp post to be tilted
upward about 105°. See Figure above.