LED Helios Light Bulb
Lucas Flat Panel II 60 Street Light
MOQ ： piece
Lead Time ： Days
Seller Support : Trade Authenticity Guaranteed & Accepting
Payment : L/C,T/T
Departure Port : Tianjin
Product details
Supply Ability
- Warranty(Year)：1 Year
Packaging & Delivery
- Length：68.6 cmWidth：33.3 cm
- Height：10.05 cm
- Packaging：1 piece
Product Specifications
Product Description
Lucas Flat Panel II 60 Street Light
A-68FP-060-CR2
FP stands for Flat Panel. So we can make use of the lenses that are
widely available in the market to make the distribution of the light to
specific customer requirements. Now available in all the existing Lucas
models.
LFP II 60 Technical Specifications
|
LED Type |
Cree R2 |
|
Number of LED |
60 |
|
Total Power Consumption |
80 watts |
|
Power Rating: |
220V 50Hz |
|
Temperature rating: |
-40 oC to 45 oC |
|
LED Initial Flux: |
6,840 lm |
|
Lights Dimension |
(L)686 x(H)100.5x(W)333mm |
|
IP Rating: |
IP 65 |
|
Warranty on Workmanship |
36 Months |
|
Guarantee on LED < 50% loss(Which ever comes first) |
60 Months or 50,000 Hrs |
LFP II 60 Packaging Information
|
Net Weight: |
11.00 Kg |
|
Gross Weight |
13.77 Kg |
|
Carton Size (1 Pc/carton): |
760x400x200mm |
|
Container |
Number of Pieces |
|
20 foot |
400 |
|
40 foot |
850 |
|
40 foot HQ |
1,030 |
LFP II 60 Engineering Drawing
Installation Guide
Lamp Post Installation:
There are total of six M10 bolts
are provided with each lamp. The top first bolt is used for safety
purpose. Lucas Lamps are designed for accommodating light post standards
used around the world by most countries. However, there are variations
and our lamps may not fit in some Lamp Post used in some countries.
Please contact us for making special modification if desired. In
general we support End of Post diameter from 65 mm to 72 mm. (2 inch to 2
? inches).
Use the supplied M10 hex tool to secure all other 5 bolts to the pole
tight and secured except the one top bolt which must go through the
pole for safety reasons.
Safety Nut Installation:
On the top side of the Lamp
Post about 135mm from the end of pole we recommend you drill a 10mm
diameter hole. This is to secure the lamp from falling off or sliding
and twisting due to wind or other natural disasters.
Lamp Post (Light Pole) Recomendations:
Lucas Lights are designed for low height lamp posts. We
recommend the lamp post to be upward tilted about 105° to obtain best
results. See Figure above.
You May Like
- Free Member
- Trade Assurance
Business Type : Manufacturer
Company Location:
Year Established: 25YRS
